Project Description
Infrared microwave three-detection detector, “three detections” actually refers to three technologies, infrared-led, microwave-assisted, and micro-controller intelligent processing.
Hot features of DS820i:
1.Pet friendly
2.Microwave supervision
3.Super anti-interference, effectively resisting interference from factors such as sunlight, radio frequency, and strong lighting.
4.Intelligent protection, using quaternary passive infrared detection, double-effect shielding filter system, and fuzzy logic analysis technology
5.Long-lasting life and stable operation for more than 5 years
6.It is suitable for prevention and monitoring of various large-scale factories, mines, oil fields, breeding places, and open-air warehouses. For home security, it can achieve a more reasonable alarm function before intrusion into the room.
Working principle of TriTech Motion Detector:
Microprocessor signal analysis technology uses computer chips in microprocessors. The computer chips store various forms of confirmation patterns to identify intrusions. Researchers have selected tens of thousands of simulated intrusion signals and stored them in the computer chips. , and program them. When the detector detects any signal that triggers the infrared and microwave detectors, it is digitally converted and transmitted to the microprocessor. In the microprocessor, these signals are compared to the intruder signal file stored in the micro-controller. If the signal stored in the micro-controller signal file is consistent with the established intruder signal program, the microprocessor will give an alarm signal after judgment, otherwise the alarm will not be issued.
Technical parameters of tritech pir detector with pet immunity DS-820i
1.Input power: 6-15VDC 16mA, walk test alarm up to 35mA Standby power: no internal standby battery
2.Alarm relay: silent operation normally closed yellow tongue relay. The maximum DC resistance load is 28VDC 3W 125mA. And protected by a 4.7 ohm, 0.5W resistor on the common ‘C’ pin of the relay. Do not use capacitive or inductive loads.
3.Working temperature: -40℃~49℃. Under UL approved installation conditions, the operating temperature is 0~49℃.
4.Microwave frequency: 10.525GHz (UL certified)
5.Detection range: standard 10.7*10.7 meters
6.Anti-tamper device: Normally closed 28VDC125mA
Tips of installation for tritech pet immunity pir detector:
- Large metal reflective objects in the coverage area will affect the coverage of microwave detection.
- It is recommended to avoid installing it indoors with strong airflow or near high-voltage wires.
- If two detectors are installed in the same room or on both sides of the same wall, they cannot be placed facing each other and should be at least 2 m apart.
- In order to achieve better working performance under high temperature conditions, aim the detector at a cool place in the protected area.
- Install the detector on a firm and stable plane, and its height can form a larger coverage of the protection area. At a certain height, increasing the vertical angle will increase the coverage area.
- Do not install the Sanjian detector in a place where it will alarm continuously or intermittently due to environmental interference.

